623V Pressure Vacuum Vent

Pressure Vacuum Vents are installed on the top of vent pipes from underground or aboveground fuel storage tanks. The vent cap and internal wire screen are designed to protect the tank vent lines against intrusion and blockage from water, debris or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent.

OPW 623V

Features & Benefits

Features

Pressure/Vacuum Setting – 2.5" to 6" water column pressure settings and -6" to -10" water column vacuum settings are factory preset and tested.
Reliable Service – Cycle tested to the equivalent of 80 years of service in the most severe environment without leakage problems.
Corrosion-Resistant Construction – A Duratuff® composite body assures a long service life.
Easy Installation – The 623V is available in 2" and 3" threaded versions.
Complies with NFPA 30 Requirements – for venting gasoline vapors upward.
Manifold Vent Pipes – Vent pipes may be manifolded to produce a single Pressure Vacuum Vent line. The 623V exceeds California's requirements of a maximum vapor leak rate of 0.17 SCFH at 2.00 inches H2O.
High Maximum Flow Rate – 6450 SCFH at 2 psi (0.1 bar) pressure drop.
Leak Rate – Multiple pressure vacuum vents may be installed on a single site. The 623V exceeds California standards with a leak rate of 0.05 SCFH or less at 2.00 inches H2O.
Maintenance – No tools required. A removable snap fit top allows for easy maintenance (recommended yearly).
100-Mesh Stainless Steel Wire Screens – Helps prevent debris and insects from entering the tank vent lines. An added screen installed at the base prevents debris from intruding from the vent stack.
Adaptor Bushing – Removable Hex threaded bushing designed for easy installation on NPT threaded risers. Allows easy access to lower screen.
ATEX Approved – For flame arrestor applications.

Materials

Top/Body: polypropylene
Base: anodized aluminum
Poppet: anodized aluminum
Screen: stainless steel mesh
Gasket: closed cell foam

Listings and Certifications

Patent No. WO2004/036096AZ

Ordering Specifications

Product #	Description	Identification Label Color	lb.	kg
623V-2203	2.5" to 6" WC Pres., -6" to -10" WC Vac. 2" Thread-On	Yellow	1.55	.70
623V-3203	2.5" to 6" WC Pres., -6" to -10" WC Vac. 3" Thread-On	Yellow	2.20	1.00

Conversion Table

Measurement Units	=	Oz.	PSI	PSI (WC)	(Merc)	Bar
Bar	x	236.0	14.5	401.4	29.53
In. Hg (Mercury)	x	7.843	0.49	13.6		0.034
In H2O (WC)	x	0.578	0.04		0.074	0.002
PSI	x	16.00		27.68	2.04	0.069
Oz.	x		0.063	1.73	0.128	0.004

Replacement Parts

Part Number	Description
C05086M	Lower Screen
H14895M	Upper Screen
C05089	2" Threaded Base Adaptor
C05122	3" Threaded Base Adaptor

Products

Other Product Families

Contact OPW

623V Pressure Vacuum Vent

Features & Benefits

Features

Materials

Listings and Certifications

Ordering Specifications

Ordering Specifications

Conversion Table

Replacement Parts

Replacement Parts

Downloads

Catalog Page

Brochures

Below Ground Fuel Compatibility Matrix

AST Product Configurations

Installation & Maintenance Instructions

Retail Fueling Products

Retail Fueling Products

Revolutionizing Fueling Operations Worldwide

Piping & Containment Systems View Products

Revolutionizing Fueling Operations Worldwide

Underground Storage Tank Equipment View Products

Revolutionizing Fueling Operations Worldwide

Standard Dispensing Equipment View Products

Revolutionizing Fueling Operations Worldwide

Stage II Vapor Recovery Equipment View Products

Revolutionizing Fueling Operations Worldwide

DEF Handling Hardware View Products

Revolutionizing Fueling Operations Worldwide

AST Equipment View Products

Revolutionizing Fueling Operations Worldwide

CleanEnergy Fueling Products View Products

Revolutionizing Fueling Operations Worldwide

Retail Fueling Applications

Retail Fueling Resources

Retail Fueling Tech Support

Training

Our Company

News & Events

Contact OPW

OPW Corporate Headquarters